Specification
GENERAL SPECIFICATION
Chemical used (Non-toxic/Non-hazardous)
| Sulfur | |
| ZnO | Zinc Oxide |
| EZ | Zinc diethyl dithiocarbamate |
| TT | Tetramethythiuram disulfide |
| V | Tamol |
| TiO2 | Titanium dioxide | WINGSTAY-L | Butylated reactive product of p-cresol adn dicyclopentadiene |
| TP | Sodium dinuty ditiocarbamate |
| Organic pigment |
Quality Standards
| D 3772-92 | ASTM Standard Specification for Rubber Finger Cots |
| IEST-RP-CC005.2 | Gloves and Fingercots used in cleanrom and other controlled environment |
| D 573-88(1984)el | ASTM Standard test method for Rubber Deterioration in and Air Oven |
| 21 CFR 170 |
Physical Properties
Tensile strength (MPa)>24
Elongation at break : NA
Physical Appearance
Natural, Orange, Black color.
Unrolled.
Rough tip surface.
Test Results FTIR & NON-VOLATILE
| Silicone oil: | Not detected/ |
| Amides: | Not Detected. |
| DOP: | Not detected. |
| NVR: | <= 0.07 mg/cm2 |
Test Result of ION CHROMATOGRAPHY (µg/cm3)
[F+Cl+Br] < 3.10
[NO3] < 0.14
[SO4] <0.30
[PO4] <0.03
[Na] < 0.85
Test Result of BACTERIOLOGICAL EXAMINATION
Standard plate count @ 37oC for 48 hours (per gram sample): < 10
Yeast (per gram sample) : <10
Mould (per gram sample): <10
Health Hazard Data
This product made of Natural Rubber Latex may cause allergic reaction on human skin. Do not continue using if skin irritation occurs. Those sensitive Latex allergic shall use other alternative hand protection such as nitrile finger cots or gloves.
Bio Compatibility
The chemical formulation of the finger cots and surface lubricating materials do not contain any substance normally known to be harmful to the user or to any person with whom the finger cots contact.
Storage Instruction
Banyan Finger Cots should be kept in a cool, dry place to prolong shelf life. Should avoid direct sunlight. Finger cots are easily contaminated while in contact with copper materials.